Blue Push Lock Hose -10 (5/8")15 m Rubber 15.7 mm ID 23 mm OD Engine mounts and Hinges These injectors can be driven

These injectors can be driven by the saturated drivers found in most OEM and aftermarket ECUs

Billet AN Fuel Block -08AN In -06AN Out with 1/8 inch NPT Port

Features: Fabricated for Large Stroke Engines Robot Welded For leak prevention Windage Trap & Crank Scraper that keeps oil under control during hard acceleration Increased oil capacity to keep high performance engine oil systems fed properly Powder Coat Black Includes matching RTS-3318 High Volume pick up

4mm (1”) id rubber grommets to suit 31

Blue Push Lock Hose -10 (5/8")15 m Rubber 15.7 mm ID 23 mm OD Engine mounts and Hinges These injectors can be drivenPart Number: AF400 10 15M 400 series push lock hose is designed for the use with our push on fittings. Available in black and blue. for use with fuel systems, E85, e10, methanol, oils, lubricants, coolant systems and low pressure brake clutch reservoir line temp range 40c ( 40f) to 100c (212f) working pressure 250psi (17 bar) suit 400 & 510 series hose ends note: on oiling systems and on all efi fuel systems, clamps must be used to secure hose ends.