Blue Push Lock Hose -4 (1/4") 1 m Rubber 6.4 mm ID 12.0 mm OD Wraps RTS' daytona style pinion supports

RTS' daytona style pinion supports are constructed from high-strength Nodular Iron

These 19mm thick (3/4") plates stiffen up the bottom end to prevent main bearings to walk or shift while also reducing crankshaft flex and block distortion under high loads

Part Number : PFETCH308BILL-BK

Part Number : PFE712S

Blue Push Lock Hose -4 (1/4") 1 m Rubber 6.4 mm ID 12.0 mm OD Wraps RTS' daytona style pinion supportsPart Number: AF400 04 1M 400 series push lock hose is designed for the use with our push on fittings. Available in black and blue. for use with fuel systems, E85, e10, methanol, oils, lubricants, coolant systems and low pressure brake clutch reservoir line temp range 40c ( 40f) to 100c (212f) working pressure 250psi (17 bar) suit 400 & 510 series hose ends note: on oiling systems and on all efi fuel systems, clamps must be used to secure hose ends.