Aluminum Finned Roller Sleeves polyester-resins-gel-coats always begin with a lightweight

always begin with a lightweight surfacing fabric such as the #262 4 oz or #259 6 oz to minimize print-through of the heavier patterned materials underneath

These braided carbon biaxial sleeves feature the desirable cosmetics of a 2x2 twill pattern

Mix #71 at 5% for thin coatings—approximately one to two tablespoons for every pint of resin

the scrim cloth will add reinforcement and mimic the expansion and contraction of the surrounding substrate

Aluminum Finned Roller Sleeves polyester-resins-gel-coats always begin with a lightweightThese sleeves slide conveniently onto our Quick Change Roller Cages. Wider roller heads feature thin, parallel fins with deep grooves that run along their circumference. They are used where greater pressure must be applied in order to saturate fabric and eliminate air for larger laminations. Aluminum construction makes them relatively lightweight and easy to clean. 2" o. d. and 1 1 2" i. d. Quick Change Roller Cages #2232, #2234, #2235