1-1/8" HSS Straight Flute Hand Reamer Quantity:1 bent long nose

bent long nose

Part Number DWDST1-3/8

Part Number: 62C350WASS/316

resulting in a higher performing tool than one-piece designs • Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types • Carrying Case – Made from a high-density polyethylene material and withstands exposure to common lubricants

1-1/8" HSS Straight Flute Hand Reamer Quantity:1 bent long noseProduct Description Hand reamers are made of high speed steel and are generally used by hand for the final sizing of holes. The square on the shank is suitable for holding in a tap wrench or a vise depending on whether the reamer or the part is rotated. A long starting taper is ground into the reamer for easy entry and accurate alignment. The straight flute hand reamer is recommended for most hand reaming applications. The spiral flute hand reamer is