Boron Carbide Sandblasting Nozzle T5, 2.0" Overall Length Boron Carbide Abrasive Grades It can leave a profile

It can leave a profile on soft substrates such as aluminum

due mostly to its lubricant properties

F2 Nozzles have an OD Barrel of 1-1/8" with a 1-3/8" Flange

1/4 - VNDV-4 - 5

Boron Carbide Sandblasting Nozzle T5, 2.0" Overall Length Boron Carbide Abrasive Grades It can leave a profileT5 Series: Straight Bore Threaded 1" 14 NPS (NPS = National Pipe Straight Parallel) threaded, 14 threads sq. inch requiring a T5 is rare! T4 vs T5? Chances are you do NOT want to order the T5. Here's why: Pipes under 1" are always measured on the inside diameter ID. Pipes 1" and over 1" are always measured on the outside OD. Thus a one inch T5 is actually slightly smaller than a T4 (visually side by side you can never tell the difference between a T4