Johnny Joint Rod End 2 1/2 Inch Narrow Forged 7/8 Inch-14 RH Threads 2.365 Inch x .562 Inch Ball RockJock 4x4 Air & Fuel - Intake & Air - Idle Air Control Valve Uses drive by wire or

Uses drive by wire or cable actuated Gm Gen Iv Ls 4-bolt throttle bodies Requires the use of early type Gm or small cap Msd or Holley Distributors

2020-2025 Jeep Gladiator JT

or pushing your Power Stroke to the limit

375 inch axle tubes

Johnny Joint Rod End 2 1/2 Inch Narrow Forged 7/8 Inch-14 RH Threads 2.365 Inch x .562 Inch Ball RockJock 4x4 Air & Fuel - Intake & Air - Idle Air Control Valve Uses drive by wire orRockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2